Date: Thu, 28 Apr 94 04:30:05 PDT From: Advanced Amateur Radio Networking Group Errors-To: TCP-Group-Errors@UCSD.Edu Reply-To: TCP-Group@UCSD.Edu Precedence: Bulk Subject: TCP-Group Digest V94 #79 To: tcp-group-digest TCP-Group Digest Thu, 28 Apr 94 Volume 94 : Issue 79 Today's Topics: JNOS 1.10b and C++ 3.1 386 compile problems (2 msgs) Send Replies or notes for publication to: . Subscription requests to . Problems you can't solve otherwise to brian@ucsd.edu. Archives of past issues of the TCP-Group Digest are available (by FTP only) from UCSD.Edu in directory "mailarchives". We trust that readers are intelligent enough to realize that all text herein consists of personal comments and does not represent the official policies or positions of any party. Your mileage may vary. So there. ---------------------------------------------------------------------- Date: Wed, 27 Apr 94 15:57:38 CST From: "John Martin" Subject: JNOS 1.10b and C++ 3.1 386 compile problems To: tcp-group@ucsd.edu, ham-digital@ucsd.edu, packet-radio@ucsd.edu I have compiled the source for JNOS 1.10b with C++ v3.1 with 80386 processor set in the makefile. The program locks up my 386 and another ham running my compiled version gets qemm386 error messages about an invalid instruction and then his PC locks up. I have compiled the same source with the same compiler for 80186 and experience no problems. Any ideas? Do I have a JNOS problem or a C++ problem? Thanks in advance. 73 -- John ------ _______ / | John W. Martin / | INTERNET: Systems Programmer / | martin@server.cdpa.state.ms.us Mississippi Central Data | C | oamartin@vm.cc.olemiss.edu Processing Authority \ D | PACKET: 301 North Lamar Street | P | kb5ggo @ k5qne.ms.usa.na 301 Building, Suite 508 / A | Jackson, MS 39201-1495 / | PHONE: (601) 359-2641 |______ | FAX: (601) 354-6016 / | \____| ------------------------------ Date: Thu, 28 Apr 1994 09:36:37 +1000 From: ccdrw@cc.newcastle.edu.au (Dave Walmsley) Subject: JNOS 1.10b and C++ 3.1 386 compile problems To: tcp-group@ucsd.edu John Martin said: >I have compiled the source for JNOS 1.10b with C++ v3.1 with 80386 >processor set in the makefile. The program locks up my 386 and another ham >running my compiled version gets qemm386 error messages about an invalid >instruction and then his PC locks up. I have compiled the same source with >the same compiler for 80186 and experience no problems. Any ideas? Do I >have a JNOS problem or a C++ problem? I've seen the opposite ;-0. My compile at home running on a 386 is OK, the one I tried for the AT that runs VK2RAP locked up as a 186 or 286 and even seemed unstable as a 8086 ver, so I went back to x15. Of course they are different CONFIG's too, just to confuse. Time to resolve this further has been very limited soo, this is just for everyones information. Dave VK2XPX, sysop VK2RAP ------------------------------ End of TCP-Group Digest V94 #79 ******************************